0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52910-C3

0.0620 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 32262-C3

0.0550 in. (1.4 mm) Cutter Diameter x 0.0820 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 14055-C3

0.0780 in. (5/64) Neck Diameter x 0.4060 in. (13/32) Reach x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 996945

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 32405-C3

1.000 mm Cutter Diameter x 1.500 mm Length of Cut x 8.000 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 971022-C3

0.2500 in. (1/4) Shank Diameter x 60 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18560 HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Square Upcut End Mill

Item Code: 48708-C4

0.3750 in. (3/8) Cutter Diameter x 0.0300 in. Radius x 0.5630 in. Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 17624-C3

0.3750 in. (3/8) Cutter Diameter x 0.2500 in. (1/4) Length of Cut x 0.9370 in. (15/16) Reach 2 Flute PCD Diamond Coated Carbide Square End Mill

Item Code: 12124

0.7500 in. (3/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.1250 in. (1-1/8) Reach 2 Flute PCD Diamond Coated Carbide Square End Mill

Item Code: 12148-HARVEY

0.0200 in. (.5 mm) Cutter Diameter x 0.1000 in. Length of Cut 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 12720-C4

0.1000 in. Cutter Diameter x 0.7500 in. (3/4) Length of Cut 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 12799-C3

0.0620 in. (1/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut x 1.0000 in. (1) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 13662-C3

0.0930 in. (3/32) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 13693-C3