0.7500 in. (3/4) Shank Diameter x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Doubled-Ended Chamfer Cutter

Item Code: 984645-C3

0.500 mm Cutter Diameter x 0.750 mm Length of Cut x 2.500 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984711-C3

0.600 mm Cutter Diameter x 0.900 mm Length of Cut x 3.000 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984713-C3

0.800 mm Cutter Diameter x 1.200 mm Length of Cut x 4.000 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984718-C3

1.000 mm Cutter Diameter x 1.500 mm Length of Cut x 5.000 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984722-C3

1.500 mm Cutter Diameter x 2.200 mm Length of Cut x 7.500 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984733-C3

2.000 mm Cutter Diameter x 3.000 mm Length of Cut x 10.000 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984745-C3

3.000 mm Cutter Diameter x 4.500 mm Length of Cut x 15.000 mm Reach 4 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 984757-C3

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.3750 in. (3/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985050

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.3750 in. (3/8) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985050-C3

0.0600 in. Radius x 0.3125 in. (5/16) Head Diameter x 0.4370 in. (7/16) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985060

0.0620 in. (1/16) Radius x 0.3125 in. (5/16) Head Diameter x 0.4370 in. (7/16) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985062-C3

0.0780 in. (5/64) Radius x 0.3750 in. (3/8) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985078

0.0780 in. (5/64) Radius x 0.3750 in. (3/8) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985078-C3

0.0930 in. (3/32) Radius x 0.3750 in. (3/8) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985093