10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.8 radius (mm)

Item Code: 3111-10.008

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3111-10.010

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3111-10.015

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3111-10.020

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3111-12.005

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.8 radius (mm)

Item Code: 3111-12.008

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3111-12.010

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3111-12.015

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3111-12.020

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3111-16.010

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3111-16.015

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3111-16.020

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3111-20.010

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3111-20.015

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3111-20.020