5mm Diameter Endmill, 5mm shank, 4 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3012-5.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3012-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3012-8.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3014-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle

Item Code: 3014-12.000

3mm Diameter Endmill, 3mm shank, 2 flutes, 20mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3014-3.000

4mm Diameter Endmill, 4mm shank, 2 flutes, 25mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3014-4.000

5mm Diameter Endmill, 5mm shank, 2 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3014-5.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3014-6.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3014-8.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3015-10.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle

Item Code: 3015-12.000

3mm Diameter Endmill, 3mm shank, 4 flutes, 20mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3015-3.000

4mm Diameter Endmill, 4mm shank, 4 flutes, 25mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3015-4.000

5mm Diameter Endmill, 5mm shank, 4 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3015-5.000