0.1090 in. (7/64) Cutter Diameter x 0.9000 in. Length of Cut 3 Flute Carbide Square End Mill

Item Code: 33702

0.0150 in. (1/64) Cutter Diameter x 0.0030 in. Radius x 0.0230 in. Length of Cut x 0.0780 in. (5/64) Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 62415-C3

0.0390 in. (1 mm) Cutter Diameter x 0.0310 in. (1/32) Length of Cut x 3 Deg. 0.8130 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

Item Code: 36919-C6

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 3 Deg. 1.2930 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996663

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 72445-C3

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.5620 in. (9/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 46912-C6

0.0620 in. (1/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut x 1.0000 in. (1) Reach 3 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 10262

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.5000 in. (1-1/2) Reach 2 Flute Carbide Square End Mill

Item Code: 952108

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute Carbide Square End Mill

Item Code: 12516-HARVEY

0.0780 in. (5/64) Radius x 0.2490 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 21078-HARVEY

0.1875 in. (3/16) Shank Diameter x 30 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 978130-C3

0.0470 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 6 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62647-C6

0.0390 in. (1 mm) Cutter Diameter x 0.0580 in. Length of Cut 4 Flute Carbide Ball End Mill

Item Code: 24639

0.0390 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16039-C3

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.2850 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 937930-C3