3.000 mm Cutter Diameter x 9.000 mm Length of Cut 5 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 977757-C6

0.3750 in. (3/8) Cutter Diameter x 0.5700 in. Length of Cut x 1.2500 in. (1-1/4) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 977924

0.5000 in. (1/2) Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 1.5000 in. (1-1/2) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 977932

0.400 mm Cutter Diameter x 0.080 mm Radius x 0.600 mm Length of Cut x 3.200 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978009-C3

0.500 mm Cutter Diameter x 0.100 mm Radius x 0.750 mm Length of Cut x 4.000 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978011-C3

0.600 mm Cutter Diameter x 0.100 mm Radius x 0.900 mm Length of Cut x 4.800 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978013-C3

0.800 mm Cutter Diameter x 0.100 mm Radius x 1.200 mm Length of Cut x 6.500 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978018-C3

1.000 mm Cutter Diameter x 0.100 mm Radius x 1.500 mm Length of Cut x 8.000 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978022-C3

1.500 mm Cutter Diameter x 0.200 mm Radius x 2.200 mm Length of Cut x 12.000 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978033-C3

2.000 mm Cutter Diameter x 0.200 mm Radius x 3.000 mm Length of Cut x 16.000 mm Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 978045-C3

0.1875 in. (3/16) Shank Diameter x 15 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 978115

0.1875 in. (3/16) Shank Diameter x 15 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 978115-C3

0.1875 in. (3/16) Shank Diameter x 20 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 978120

0.1875 in. (3/16) Shank Diameter x 30 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 978130

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 978145