0.0600 in. Radius x 0.3125 in. (5/16) Head Diameter x 0.4370 in. (7/16) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 985060-C3

0.1875 in. (3/16) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 55212-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0300 in. Length of Cut x 0.1600 in. Reach 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 55020-C3

0.1870 in. Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 41312-C3

0.1562 in. (5/32) Cutter Diameter x 0.5620 in. (9/16) Length of Cut 2 Flute Carbide 45 Deg. Helix Ball End Mill

Item Code: 27910-HARVEY

0.0900 in. Cutter Diameter x 0.9000 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 27190

0.0150 in. (1/64) Cutter Diameter x 0.1500 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 20515-HARVEY

0.0150 in. (1/64) Cutter Diameter x 0.0780 in. (5/64) Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 997015

0.0150 in. (1/64) Cutter Diameter x 0.1500 in. Length of Cut 3 Flute Carbide Tapered Ball End Mill

Item Code: 21515-HARVEY

0.0300 in. Cutter Diameter x 0.3000 in. Length of Cut 3 Flute Carbide Tapered Ball End Mill

Item Code: 21530-HARVEY

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 20560

0.0350 in. Radius x 0.2490 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 21035-HARVEY

0.7500 in. (3/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut x 100 Deg. Included Mill Style 4 Flute Carbide Drill/End Mill

Item Code: 27448

0.6250 in. (5/8) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut x 100 Deg. Included Mill Style 4 Flute Carbide Drill/End Mill

Item Code: 27440

0.1560 in. (5/32) Radius x 0.6250 in. (5/8) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16110-C3