3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-19.054

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, 42 Reach (mm), Carbide, Bright Finish, HB Shank, 92mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

Item Code: 6702-16.00

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

Item Code: 3060-15.87

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, Ball Nose

Item Code: 4261-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.09 radius

Item Code: 6759-9.527

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-19.056

16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3689-16.00

7.5mm Diameter Endmill, 7.5mm shank, 3 flutes, 16mm Length of Cut, Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3741-7.50

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 3/8 Length of Cut, Carbide, Bright Finish, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3172-3.17

6.5mm Diameter Endmill, 6.5mm shank, 2 flutes, 13mm Length of Cut, Carbide, FIREX Coated, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3676-6.50

1/16 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.0012 chamfer

Item Code: 3086-1.59

3mm Diameter Endmill, 6mm shank, 4 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, nano-A Coated, with Coolant, HA Shank, 57mm Overal Length, 36/38° Helix Angle, 0.1 chamfer (mm)

Item Code: 3800-3.00

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3188-12.70

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3188-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3188-15.87