0.0550 in. (1.4 mm) Cutter Diameter x 0.1650 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76255-C3

0.0600 in. Cutter Diameter x 0.1800 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76260-C3

0.0620 in. (1/16) Cutter Diameter x 0.1860 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76262-C3

0.0650 in. Cutter Diameter x 0.1950 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76265-C3

0.0700 in. Cutter Diameter x 0.2100 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76270-C3

0.0750 in. (1.9 mm) Cutter Diameter x 0.2250 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76275-C3

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76278-C3

0.0800 in. Cutter Diameter x 0.2400 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76280-C3

0.0850 in. Cutter Diameter x 0.2550 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76285-C3

0.0900 in. Cutter Diameter x 0.2700 in. Length of Cut x 0.6250 in. (5/8) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76290-C3

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 0.6250 in. (5/8) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76293-C3

0.0950 in. Cutter Diameter x 0.2850 in. Length of Cut x 0.6250 in. (5/8) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76295-C3

0.1000 in. Cutter Diameter x 0.3000 in. Length of Cut x 0.6250 in. (5/8) Reach 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76300-C3

0.1000 in. Radius x 0.0580 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 77800

0.1000 in. Radius x 0.0580 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 77800-C3