0.0470 in. (3/64) Neck Diameter x 0.1410 in. Reach x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 911030-C3

0.1406 in. (9/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.4250 in. Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 912409

0.1406 in. (9/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.4250 in. Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 912409-C8

0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.1250 in. (1-1/8) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 912424

0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.1250 in. (1-1/8) Length of Cut 3 Flute TiB2 Coated Carbide V-Helix Corner Radius End Mill

Item Code: 912424-C8

0.1090 in. (7/64) Cutter Diameter x 0.0050 in. Radius x 0.5700 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 912502

0.1090 in. (7/64) Cutter Diameter x 0.0050 in. Radius x 0.5700 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 912502-C3

0.0390 in. (1 mm) Cutter Diameter x 0.0080 in. Radius x 0.0590 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 913739

0.0390 in. (1 mm) Cutter Diameter x 0.0080 in. Radius x 0.0590 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 913739-C3

0.0500 in. Cutter Diameter x 0.0080 in. Radius x 0.0750 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 913750

0.0500 in. Cutter Diameter x 0.0080 in. Radius x 0.0750 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 913750-C3

0.1180 in. (3 mm) Cutter Diameter x 0.0080 in. Radius x 0.1770 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 913805

0.1180 in. (3 mm) Cutter Diameter x 0.0080 in. Radius x 0.1770 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 913805-C3

0.1875 in. (3/16) Cutter Diameter x 0.0050 in. Radius x 0.5620 in. (9/16) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 913912-C3

0.1562 in. (5/32) Cutter Diameter x 0.2350 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

Item Code: 914510