8mm Diameter Endmill, 8mm shank, 2 flutes, 8mm Length of Cut, PCD, with Coolant, HA Shank, 63mm Overal Length, 0.1 radius (mm)

Item Code: 5492-8.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 12mm Length of Cut, PCD, with Coolant, HA Shank, 63mm Overal Length, 0.1 radius (mm)

Item Code: 5492-8.001

10mm Diameter Endmill, 10mm shank, 2 flutes, 8mm Length of Cut, PCD, with Coolant, HA Shank, 100mm Overal Length, 0.1 radius (mm)

Item Code: 5493-10.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 16mm Length of Cut, PCD, with Coolant, HA Shank, 100mm Overal Length, 0.1 radius (mm)

Item Code: 5493-10.001

12mm Diameter Endmill, 12mm shank, 2 flutes, 8mm Length of Cut, PCD, with Coolant, HA Shank, 100mm Overal Length, 0.1 radius (mm)

Item Code: 5493-12.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 16mm Length of Cut, PCD, with Coolant, HA Shank, 100mm Overal Length, 0.1 radius (mm)

Item Code: 5493-12.001

14mm Diameter Endmill, 14mm shank, 2 flutes, 8mm Length of Cut, PCD, with Coolant, HA Shank, 100mm Overal Length, 0.1 radius (mm)

Item Code: 5493-14.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 16mm Length of Cut, PCD, with Coolant, HA Shank, 100mm Overal Length, 0.1 radius (mm)

Item Code: 5493-14.001

16mm Diameter Endmill, 16mm shank, 2 flutes, 12mm Length of Cut, PCD, with Coolant, HA Shank, 150mm Overal Length, 0.1 radius (mm)

Item Code: 5493-16.000

16mm Diameter Endmill, 16mm shank, 2 flutes, 20mm Length of Cut, PCD, with Coolant, HA Shank, 150mm Overal Length, 0.1 radius (mm)

Item Code: 5493-16.001

18mm Diameter Endmill, 18mm shank, 2 flutes, 12mm Length of Cut, PCD, with Coolant, HA Shank, 125mm Overal Length, 0.1 radius (mm)

Item Code: 5493-18.000

18mm Diameter Endmill, 18mm shank, 2 flutes, 20mm Length of Cut, PCD, with Coolant, HA Shank, 125mm Overal Length, 0.1 radius (mm)

Item Code: 5493-18.001

18mm Diameter Endmill, 18mm shank, 2 flutes, 12mm Length of Cut, PCD, with Coolant, HA Shank, 150mm Overal Length, 0.1 radius (mm)

Item Code: 5493-18.002

18mm Diameter Endmill, 18mm shank, 2 flutes, 20mm Length of Cut, PCD, with Coolant, HA Shank, 150mm Overal Length, 0.1 radius (mm)

Item Code: 5493-18.003

20mm Diameter Endmill, 20mm shank, 2 flutes, 12mm Length of Cut, PCD, with Coolant, HA Shank, 150mm Overal Length, 0.1 radius (mm)

Item Code: 5493-20.000