20mm Diameter Endmill, 20mm shank, 5 flutes, 60mm Length of Cut, 74 Reach (mm), Carbide, FIREX Coated, HA Shank, 126mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3897-20.000

4mm Diameter Endmill, 6mm shank, 5 flutes, 12mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 65mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3897-4.000

5mm Diameter Endmill, 6mm shank, 5 flutes, 15mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 65mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3897-5.000

6mm Diameter Endmill, 6mm shank, 5 flutes, 18mm Length of Cut, 28 Reach (mm), Carbide, FIREX Coated, HA Shank, 65mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3897-6.000

8mm Diameter Endmill, 8mm shank, 5 flutes, 24mm Length of Cut, 38 Reach (mm), Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3897-8.000

10mm Diameter Endmill, 10mm shank, 5 flutes, 30mm Length of Cut, 38 Reach (mm), Carbide, FIREX Coated, HB Shank, 80mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3898-10.000

12mm Diameter Endmill, 12mm shank, 5 flutes, 36mm Length of Cut, 46 Reach (mm), Carbide, FIREX Coated, HB Shank, 93mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3898-12.000

20mm Diameter Endmill, 20mm shank, 5 flutes, 60mm Length of Cut, 74 Reach (mm), Carbide, FIREX Coated, HB Shank, 126mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3898-20.000

4mm Diameter Endmill, 6mm shank, 5 flutes, 12mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HB Shank, 65mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3898-4.000

5mm Diameter Endmill, 6mm shank, 5 flutes, 15mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HB Shank, 65mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3898-5.000

6mm Diameter Endmill, 6mm shank, 5 flutes, 18mm Length of Cut, 28 Reach (mm), Carbide, FIREX Coated, HB Shank, 65mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3898-6.000

8mm Diameter Endmill, 8mm shank, 5 flutes, 24mm Length of Cut, 38 Reach (mm), Carbide, FIREX Coated, HB Shank, 75mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3898-8.000

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0079 chamfer

Item Code: 4250-11.110

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0138 chamfer

Item Code: 4250-15.870

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0295 chamfer

Item Code: 4250-25.400