0.0937 in. (3/32) Cutter Diameter x 0.1870 in. (3/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 905106-C3

0.1180 in. (3 mm) Cutter Diameter x 0.0050 in. Radius x 0.9500 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 905305

0.1180 in. (3 mm) Cutter Diameter x 0.0050 in. Radius x 0.9500 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 905305-C3

0.1180 in. (3 mm) Cutter Diameter x 0.0100 in. Radius x 0.9500 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 905405

0.1180 in. (3 mm) Cutter Diameter x 0.0100 in. Radius x 0.9500 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 905405-C3

0.5000 in. (1/2) Shank Diameter x 45 Deg. Per Side 2 Flute Carbide Pointed Doubled-Ended Chamfer Cutter

Item Code: 905845

0.5000 in. (1/2) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Doubled-Ended Chamfer Cutter

Item Code: 905845-C3

0.3120 in. (5/16) Head Diameter x 0.0550 in. Loc x 0.2810 in. (9/32) Neck Length x 45 Deg. Per Side 6 Flute Carbide Back Chamfer Cutter

Item Code: 906120

0.3120 in. (5/16) Head Diameter x 0.0550 in. Loc x 0.2810 in. (9/32) Neck Length x 45 Deg. Per Side 6 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906120-C3

0.3750 in. (3/8) Head Diameter x 0.0660 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 6 Flute Carbide Back Chamfer Cutter

Item Code: 906124

0.3750 in. (3/8) Head Diameter x 0.0660 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 6 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906124-C3

0.5000 in. (1/2) Head Diameter x 0.0880 in. Loc x 0.5000 in. (1/2) Neck Length x 45 Deg. Per Side 6 Flute Carbide Back Chamfer Cutter

Item Code: 906132

0.5000 in. (1/2) Head Diameter x 0.0880 in. Loc x 0.5000 in. (1/2) Neck Length x 45 Deg. Per Side 6 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906132-C3

0.1875 in. (3/16) Cutter Diameter x 0.0300 in. Radius x 0.5700 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Corner Radius End Mill

Item Code: 906312

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Corner Radius End Mill

Item Code: 906316