0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 0.5000 in. (1/2) Reach 4 Flutes AlTiN Coated Carbide Square Backdraft Cutter

Item Code: 716193-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 4 Flutes Carbide Square Backdraft Cutter

Item Code: 716208

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 4 Flutes AlTiN Coated Square Backdraft Cutter

Item Code: 716208-C3

0.1875 in. (3/16) Cutter Diameter x 0.2850 in. Length of Cut x 1.0000 in. (1) Reach 4 Flutes Carbide Square Backdraft Cutter

Item Code: 716212

0.1875 in. (3/16) Cutter Diameter x 0.2850 in. Length of Cut x 1.0000 in. (1) Reach 4 Flutes AlTiN Coated Carbide Square Backdraft Cutter

Item Code: 716212-C3

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.2500 in. (1-1/4) Reach 4 Flutes Carbide Square Backdraft Cutter

Item Code: 716216

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.2500 in. (1-1/4) Reach 4 Flutes AlTiN Coated Carbide Square Backdraft Cutter

Item Code: 716216-C3

0.1250 in. (1/8) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 300 Deg. 4 Flutes Carbide Undercutting End Mill

Item Code: 716608

0.1250 in. (1/8) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 300 Deg. 4 Flutes AlTiN Coated Carbide Undercutting End Mill

Item Code: 716608-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 8 RH Teeth 10 LH Teeth Carbide Diamond Cut End Mill 8 RH Teeth

Item Code: 716908

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 10 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill 8 RH Teeth

Item Code: 716908-C4

0.1875 in. (3/16) Cutter Diameter x 0.2850 in. Length of Cut 9 RH Teeth 11 LH Teeth Carbide Diamond Cut End Mill 8 RH Teeth

Item Code: 716912

0.1875 in. (3/16) Cutter Diameter x 0.2850 in. Length of Cut 9 RH Teeth 11 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill 8 RH Teeth

Item Code: 716912-C4

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 10 RH Teeth 12 LH Teeth Carbide Diamond Cut End Mill 8 RH Teeth

Item Code: 716916

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 10 RH Teeth 12 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill 8 RH Teeth

Item Code: 716916-C4