0.0470 in. (3/64) Cutter Diameter x 0.0700 in. Length of Cut x 0.3750 in. (3/8) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 56147-C6

0.1000 in. Cutter Diameter x 0.1500 in. Length of Cut x 0.8000 in. Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 56200-C6

0.1562 in. (5/32) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 1.2500 in. (1-1/4) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 56210-C6

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 56408

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.5700 in. Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 56412

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 56416

0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.1250 in. (1-1/8) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 56424-HARVEY

0.5000 in. (1/2) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.5000 in. (1-1/2) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 56432-HARVEY

0.0550 in. (1.4 mm) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0650 in. Length Of Cut 3 Flute AlTiN Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56510-C3

0.1150 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 0.1400 in. (9/64) Length Of Cut 3 Flute Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56530

0.1150 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 0.1400 in. (9/64) Length Of Cut 3 Flute AlTiN Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56530-C3

0.1760 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 0.2100 in. Length Of Cut 3 Flute Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56540

0.2360 in. (6 mm) Cutter Diameter x 0.0620 in. (1/16) Radius x 0.2800 in. Length Of Cut 3 Flute Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56550

0.2360 in. (6 mm) Cutter Diameter x 0.0620 in. (1/16) Radius x 0.2800 in. Length Of Cut 3 Flute AlTiN Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56550-C3

0.3230 in. Cutter Diameter x 0.0930 in. (3/32) Radius x 0.3800 in. Length Of Cut 3 Flute AlTiN Coated Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56560-C3