0.0400 in. Cutter Diameter x 0.1200 in. Length of Cut 4 Flute AlTiN Coated Carbide Square Micro Endmill

Item Code: TC58240

1/4 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length Carbide 4 Flutes Square GMX-35 Coated Endmill

Item Code: GM14FL4

1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .060CR

Item Code: 37644

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 8 Flute Tplus Coated Corner Radius Endmill

Item Code: 86241

0.1562 in. (5/32) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2350 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52310-C6

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0200 in. Radius x 0.4375 in. (7/16) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59864-HELICAL

0.0780 in. (5/64) Cutter Diameter x 0.0100 in. Radius x 0.1180 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52678-C3

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 2.5000 in. (2-1/2) Length of Cut x 5.0000 in. (5) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 83109-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 55108-C3

0.1000 in. Cutter Diameter x 0.8000 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59100-C6

5/32 Inch Solid Carbide, AlTiN Coated, 4-Flute, 9/16 LOC, 2 Inch OAL, Single End Ball Nose Endmill

Item Code: 54090-COATED

0.0930 in. (3/32) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0740 in. Length of Cut x 0.7500 in. (3/4) Reach 4 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 999093-C6

0.7500 in. (3/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute Carbide Square Endmill

Item Code: TC10548

0.0620 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 5 Flute TiB2 Coated Carbide V-Helix Square Finisher End Mill

Item Code: 66762-C8

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 6 Flute Aplus Coated Square Endmill

Item Code: 59253