0.0930 in. (3/32) Cutter Diameter x 0.0030 in. Radius x 0.1390 in. Length of Cut x 0.7500 in. (3/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 972793-C3

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Ball Endmill

Item Code: 49256

0.0780 in. (5/64) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 888478-C3

5/8 in. x 5/8 in. x 1-1/4 in. x 3-1/2 in. Solid Carbide TiALN-LW 4 Flute Square End Weldon Shank End Mill

Item Code: TF4V0516006S

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1180 in. Length of Cut x 0.4060 in. (13/32) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 919878-C6

5/16 Solid Carbide ALTima Coated 4-Flute 2-1/2 OAL TuffCut General Purpose Endmill

Item Code: 11131250A

0.0100 in. Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

Item Code: CRE-125-010

1/2 Tuff Cut® X-AL 3-Flute, Center Cutting Aluminum Finisher Endmill - 1-1/4 Inch LOC, 3 Inch OAL, .030R

Item Code: 13850003R.030

0.3750 in. (3/8) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0700 in. Tip Diameter 5 Flute ZPlus Coated Carbide Chamfer Mill

Item Code: 88443

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Square Endmill

Item Code: 82263

0.0310 in. (1/32) Radius x 0.0580 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 67631-C3

0.4375 in. (7/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 4 Flute AlTiN Coated Carbide Ball Endmill

Item Code: TC11628

0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 931816-C6

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 890208-C6

12.00mm (.4724) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Extra-Long

Item Code: 92232