0.0620 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 3 Flute Carbide Square End Mill

Item Code: 31862

0.3750 in. (3/8) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

Item Code: 59821-HELICAL

3/8 in. x 3/8 in. x 7/8 in. x 2-1/2 in. Solid Carbide WP15PE Weldon Shank .020 Corner Radius High Performance End Mill

Item Code: 4S0R10004NW-WP15PE

3/8 Inch Diameter, 3/8 Inch LOC, 2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill

Item Code: 17737500A

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Square Endmill

Item Code: 59842-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut 4 Flute Carbide Corner Radius Endmill

Item Code: TC74039

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2850 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52312-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73020-C3

1/8 Inch Solid Carbide, AlTiN Coated, 4-Flute, 1/2 LOC, 1-1/2 Inch OAL, Single End Ball Nose Endmill

Item Code: 54310-COATED

1/4 in. x 1/4 in. Solid Carbide Square End 4 Flute Weldon Endmill

Item Code: HPHV750S4225CH KCPM15

0.2500 in. (1/4) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut 5 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 920516-C6

1/4 (.2500) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- .015CR

Item Code: 33806-FULLERTON

11/32 (.3438) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

Item Code: 30625-FULLERTON

4.00mm (.1575) Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

Item Code: 92025

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0150 in. (1/64) Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 82973-HELICAL