0.0150 in. (1/64) Cutter Diameter x 0.0780 in. (5/64) Length of Cut 3 Flute Carbide Ball End Mill

Item Code: 32215-HARVEY

0.1870 in. (3/16) Radius x 0.0580 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17187-C3

0.1875 in. (3/16) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 23212

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 38362-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 1 Flute Carbide Square Upcut End Mill

Item Code: 51216-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 48716-HARVEY

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 2 Flute Carbide 45 Deg. Helix Ball End Mill

Item Code: 27831-HARVEY

0.3125 in. (5/16) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 29520-C3

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 35493-C3

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.2790 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 45693-C3

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 7 Deg. 0.8160 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

Item Code: 40462-C6

0.0350 in. (.9 mm) Cutter Diameter x 0.0100 in. Radius x 0.1050 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 27235-C3

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 1.2500 in. (1-1/4) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 38816-C6

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 2.0000 in. (2) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 32116-C6

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 0.6250 in. (5/8) Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76493-C3