0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1875 in. (3/16) Length of Cut 4 Flute AlTiN Coated Carbide Reduce Shank Corner Radius End Mill

Item Code: 17608-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute Carbide Ball End Mill

Item Code: 17720-HARVEY

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 17720-C6

0.0390 in. (1 mm) Cutter Diameter x 0.0590 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute Carbide Ball End Mill

Item Code: 17739-HARVEY

0.0390 in. (1 mm) Cutter Diameter x 0.0590 in. Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 17739-C6

0.3750 in. (3/8) Shank Diameter x 15 Deg. Per Side 3 Flute TiB2 Coated Carbide Flat Chamfer Cutter

Item Code: 18415-C8

0.3750 in. (3/8) Shank Diameter x 30 Deg. Per Side 3 Flute TiB2 Coated Carbide Flat Chamfer Cutter

Item Code: 18430-C8

0.3750 in. (3/8) Shank Diameter x 70 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18470

0.3750 in. (3/8) Shank Diameter x 70 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18470-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 2 Deg. 2.5000 in. (2-1/2) Taper Reach 2 Flute Carbide Ball End Mill

Item Code: 21362

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 2 Deg. 2.5000 in. (2-1/2) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 21362-C6

0.0620 in. Cutter Diameter x 0.2500 in. (1/4) Neck Length x 220 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 22904-HARVEY

0.0620 in. Cutter Diameter x 0.2500 in. (1/4) Neck Length x 220 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 22904-C3

0.0400 in. Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 23271-HARVEY

0.0400 in. Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 23271-C3