0.1181 in. (3 mm) Cutter Diameter x 0.3540 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 49605

0.3750 in. (3/8) Cutter Diameter x 0.0400 in. Radius x 1.0000 in. (1) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 72840

0.1250 in. (1/8) Cutter Diameter x 0.1880 in. Length of Cut x 2 Deg. 2.0000 in. (2) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 18908-C6

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 2 Deg. 1.5000 in. (1-1/2) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 24831-C6

0.2500 in. (1/4) Shank Diameter x 40 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18540

0.2500 in. (1/4) Shank Diameter x 55 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18555

0.0310 in. (1/32) Cutter Diameter x 0.0100 in. Radius x 0.2500 in. (1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 938031-C3

0.0500 in. Cutter Diameter x 0.0400 in. Length of Cut x 0.0780 in. (5/64) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37850-C6

0.0550 in. (1.4 mm) Cutter Diameter x 0.0820 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 24655-C4

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.4060 in. (13/32) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 53078-HARVEY

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute TiB2 Coated Carbide V-Helix Square End Mill

Item Code: 927162-C8

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.4060 in. (13/32) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53078-C4

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1 Deg. 1.0270 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 925091-C8

0.0800 in. Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17080-C3

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth AlTiN Coated Carbide Deburring Chamfer Cutter

Item Code: 994045-C3