0.3125 in. (5/16) Cutter Diameter x 0.8125 in. (13/16) Length of Cut 4 Flute TiCN Coated Carbide Ball Endmill

Item Code: TC91520

0.3125 in. (5/16) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Cobalt Fine Pitch Rougher Endmill

Item Code: TE66209

0.3125 in. (5/16) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Cobalt Course Pitch Rougher Endmill

Item Code: TE63509

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74617

0.3125 in. (5/16) Cutter Diameter x 0.0200 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74618

0.3125 in. (5/16) Cutter Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74619

0.3125 in. (5/16) Cutter Diameter x 0.0450 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74620

0.3125 in. (5/16) Cutter Diameter x 0.0600 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74621

0.3125 in. (5/16) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute TiCN Coated Carbide Square Endmill

Item Code: TC97520

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74417

0.3125 in. (5/16) Cutter Diameter x 0.0200 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74418

0.3125 in. (5/16) Cutter Diameter x 0.0300 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74419

0.3125 in. (5/16) Cutter Diameter x 0.0450 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74420

0.3125 in. (5/16) Cutter Diameter x 0.0600 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74421

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC23826