0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995720

0.0390 in. (1 mm) Cutter Diameter x 0.1170 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995739

0.0470 in. (3/64) Cutter Diameter x 0.1410 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995747

0.0600 in. Cutter Diameter x 0.1800 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995760

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995778

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995793

0.1000 in. Cutter Diameter x 0.3000 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995800

0.1180 in. (3 mm) Cutter Diameter x 0.3540 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995805

0.1562 in. (5/32) Cutter Diameter x 0.4700 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 995810

0.0150 in. (1/64) Neck Diameter x 0.1250 in. (1/8) Reach x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 995945

0.0150 in. (1/64) Neck Diameter x 0.1250 in. (1/8) Reach x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 995945-C3

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut x 5 Deg. 0.9190 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996007

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut x 5 Deg. 0.9190 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996007-C8

0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 5 Deg. 0.8410 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

Item Code: 996014

0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 5 Deg. 0.8410 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

Item Code: 996014-C8