1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

Item Code: 3060-12.700

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.031 chamfer

Item Code: 3060-25.400

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, HA/HB Shank, 3-1/2 Overall Length, 40/42° Helix Angle, 0.01 chamfer

Item Code: 3077-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, HA/HB Shank, 3-1/2 Overall Length, 40/42° Helix Angle, 0.014 chamfer

Item Code: 3077-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, HA/HB Shank, 4 Overall Length, 40/42° Helix Angle, 0.018 chamfer

Item Code: 3077-19.050

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer

Item Code: 3077-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer

Item Code: 3077-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.008 chamfer

Item Code: 3077-9.520

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 40/42° Helix Angle, 0.014 chamfer

Item Code: 3078-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 40/42° Helix Angle, 0.018 chamfer

Item Code: 3078-19.050

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2 Overall Length, 40/42° Helix Angle, 0.004 chamfer

Item Code: 3078-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer

Item Code: 3078-6.350

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.008 chamfer

Item Code: 3078-9.520

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-3/4 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-11.114

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.04 radius

Item Code: 3079-12.705