0.1875 in. (3/16) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 3 Flute Tapered AlTiN Coated Carbide Ball Endmill

Item Code: TC85063

0.0150 in. (1/64) Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flutes Carbide DE Corner Rounding Endmill

Item Code: TC95372

0.1180 in. Radius x 0.0600 in. Pilot Diameter 2 Flutes Carbide DE Corner Rounding Endmill

Item Code: TC95385

0.2500 in. (1/4) Shank Diameter x 60° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95418

0.3750 in. (3/8) Shank Diameter x 60° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95420

0.5000 in. (1/2) Shank Diameter x 60° Included Angle x 3.0000 in. (3) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95421

0.1250 in. (1/8) Shank Diameter x 90° Included Angle x 1.5000 in. (1-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95422

0.2500 in. (1/4) Shank Diameter x 90° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95424

0.3750 in. (3/8) Shank Diameter x 90° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95426

0.5000 in. (1/2) Shank Diameter x 90° Included Angle x 3.0000 in. (3) Overall Length x 0.0100 in. Tip Diameter 4 Flutes Carbide Pointed Chamfer Mill

Item Code: TC95427

0.2500 in. (1/4) Shank Diameter x 60° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes AlTiN Coated Carbide Pointed Chamfer Mill

Item Code: TC95436

0.3750 in. (3/8) Shank Diameter x 60° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes AlTiN Coated Carbide Pointed Chamfer Mill

Item Code: TC95438

0.5000 in. (1/2) Shank Diameter x 60° Included Angle x 3.0000 in. (3) Overall Length x 0.0100 in. Tip Diameter 4 Flutes AlTiN Coated Carbide Pointed Chamfer Mill

Item Code: TC95439

0.1250 in. (1/8) Shank Diameter x 90° Included Angle x 1.5000 in. (1-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes AlTiN Coated Carbide Pointed Chamfer Mill

Item Code: TC95440

0.2500 in. (1/4) Shank Diameter x 90° Included Angle x 2.5000 in. (2-1/2) Overall Length x 0.0100 in. Tip Diameter 4 Flutes AlTiN Coated Carbide Pointed Chamfer Mill

Item Code: TC95442