6mm Diameter Endmill, 6mm shank, 4 flutes, 30mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3023-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 40mm Length of Cut, Carbide, FIREX Coated, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3023-8.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HB Shank, 72mm Overal Length, 30° Helix Angle

Item Code: 3024-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HB Shank, 83mm Overal Length, 30° Helix Angle

Item Code: 3024-12.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 22mm Length of Cut, Carbide, HB Shank, 83mm Overal Length, 30° Helix Angle

Item Code: 3024-14.000

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HB Shank, 92mm Overal Length, 30° Helix Angle

Item Code: 3024-16.000

18mm Diameter Endmill, 18mm shank, 2 flutes, 26mm Length of Cut, Carbide, HB Shank, 92mm Overal Length, 30° Helix Angle

Item Code: 3024-18.000

20mm Diameter Endmill, 20mm shank, 2 flutes, 32mm Length of Cut, Carbide, HB Shank, 104mm Overal Length, 30° Helix Angle

Item Code: 3024-20.000

3mm Diameter Endmill, 6mm shank, 2 flutes, 7mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3024-3.000

4mm Diameter Endmill, 6mm shank, 2 flutes, 8mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3024-4.000

5mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3024-5.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3024-6.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 16mm Length of Cut, Carbide, HB Shank, 63mm Overal Length, 30° Helix Angle

Item Code: 3024-8.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 40mm Length of Cut, Carbide, FIREX Coated, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3030-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle

Item Code: 3030-12.000