0.1090 in. (7/64) Radius x 0.0580 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17109-HARVEY

0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut x 1.4200 in. Reach 3 Flute Carbide Square End Mill

Item Code: 35505-HARVEY

0.4375 in. (7/16) Cutter Diameter x 1.0000 in. (1) Length of Cut x 90 Deg. Included Mill Style 4 Flute Cobalt Drill/End Mill

Item Code: 14328

0.1181 in. (3 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 300 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 98953M-C3

0.0050 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 932205

0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.1200 in. Length of Cut 4 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 26340-C4

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 3 Flute Amorphous Diamond Coated Carbide V-Helix Square End Mill

Item Code: 942308-C4

0.1875 in. (3/16) Cutter Diameter x 0.2810 in. (9/32) Length of Cut x 2.2500 in. (2-1/4) Reach 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 35512-C4

0.0390 in. Radius x 0.1070 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68039-C3

0.0200 in. Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68020-HARVEY

0.0780 in. (5/64) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 888278-C3

0.1250 in. (1/8) Cutter Diameter x 0.6250 in. (5/8) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 922908

0.0250 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 45325

0.0390 in. (1 mm) Cutter Diameter x 0.0310 in. (1/32) Length of Cut x 1.5 Deg. 0.4880 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

Item Code: 19025-C6

0.0394 in. (1 mm) Cutter Diameter x 0.0470 in. (3/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 2311M-C3