0.1870 in. (3/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 16 RH Teeth 13 LH Teeth Carbide Deburring Undercut End Mill

Item Code: 899712

0.1870 in. (3/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 16 RH Teeth 13 LH Teeth AlTiN Coated Carbide Deburring Undercut End Mill

Item Code: 899712-C3

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 16 RH Teeth 13 LH Teeth Carbide Deburring Undercut End Mill

Item Code: 899716

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 16 RH Teeth 13 LH Teeth AlTiN Coated Carbide Deburring Undercut End Mill

Item Code: 899716-C3

0.1250 in. (1/8) Shank Diameter x 30 Deg. Per Side 2 Helical Flute Carbide Pointed Chamfer Cutter

Item Code: 900108

0.1250 in. (1/8) Shank Diameter x 30 Deg. Per Side 2 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 900108-C3

0.1875 in. (3/16) Shank Diameter x 30 Deg. Per Side 2 Helical Flute Carbide Pointed Chamfer Cutter

Item Code: 900112

0.1875 in. (3/16) Shank Diameter x 30 Deg. Per Side 2 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 900112-C3

0.2500 in. (1/4) Shank Diameter x 30 Deg. Per Side 2 Helical Flute Carbide Pointed Chamfer Cutter

Item Code: 900116

0.2500 in. (1/4) Shank Diameter x 30 Deg. Per Side 2 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 900116-C3

0.3750 in. (3/8) Shank Diameter x 30 Deg. Per Side 2 Helical Flute Carbide Pointed Chamfer Cutter

Item Code: 900124

0.3750 in. (3/8) Shank Diameter x 30 Deg. Per Side 2 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 900124-C3

0.5000 in. (1/2) Shank Diameter x 30 Deg. Per Side 2 Helical Flute Carbide Pointed Chamfer Cutter

Item Code: 900132

0.5000 in. (1/2) Shank Diameter x 30 Deg. Per Side 2 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 900132-C3

0.500 mm Cutter Diameter x 1.500 mm Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 900411