7/16 Inch Diameter Endmill, 7/16 Shank, 3 flutes, 1 Length of Cut, Carbide, HA/HB Shank, 2-3/4 Overall Length, 39/40/41° Helix Angle, 0.0087 chamfer

Item Code: 4265-11.110

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, HA/HB Shank, 3-1/2 Overall Length, 39/40/41° Helix Angle, 0.0126 chamfer

Item Code: 4265-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA/HB Shank, 4 Overall Length, 39/40/41° Helix Angle, 0.015 chamfer

Item Code: 4265-19.050

1 Inch Diameter Endmill, 1 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA/HB Shank, 4 Overall Length, 39/40/41° Helix Angle, 0.0201 chamfer

Item Code: 4265-25.400

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 13/16 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 39/40/41° Helix Angle, 0.0063 chamfer

Item Code: 4265-7.940

5/8 Inch Diameter Endmill, 5/8 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, HA/HB Shank, 3-1/2 Overall Length, 29/30/31° Helix Angle, 0.0197 chamfer

Item Code: 4266-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA/HB Shank, 4 Overall Length, 29/30/31° Helix Angle, 0.0197 chamfer

Item Code: 4266-19.050

1 Inch Diameter Endmill, 1 Shank, 3 flutes, 1-1/2 Length of Cut, Carbide, HA/HB Shank, 4 Overall Length, 29/30/31° Helix Angle, 0.0315 chamfer

Item Code: 4266-25.400

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/4 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 29/30/31° Helix Angle, 0.0118 chamfer

Item Code: 4266-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 13/16 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 29/30/31° Helix Angle, 0.0118 chamfer

Item Code: 4266-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 1 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 29/30/31° Helix Angle, 0.0118 chamfer

Item Code: 4266-9.520

10mm Diameter Endmill, 10mm shank, 2 flutes, 8mm Length of Cut, PCD, with Coolant, HA Shank, 72mm Overal Length, 0.1 radius (mm)

Item Code: 5492-10.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 16mm Length of Cut, PCD, with Coolant, HA Shank, 72mm Overal Length, 0.1 radius (mm)

Item Code: 5492-10.001

12mm Diameter Endmill, 12mm shank, 2 flutes, 8mm Length of Cut, PCD, with Coolant, HA Shank, 83mm Overal Length, 0.1 radius (mm)

Item Code: 5492-12.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 16mm Length of Cut, PCD, with Coolant, HA Shank, 83mm Overal Length, 0.1 radius (mm)

Item Code: 5492-12.001