1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, Ball Nose

Item Code: 4261-6.35

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, Ball Nose

Item Code: 4261-9.52

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3181-12.70

7/64 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, Bright Finish, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3150-2.78

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3151-4.76

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3173-3.17

2mm Diameter Endmill, 2mm shank, 3 flutes, 6mm Length of Cut, Carbide, FIREX Coated, HA Shank, 32mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3741-2.00

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0059 chamfer

Item Code: 4257-4.76

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

Item Code: 4257-6.35

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38° Helix Angle, 0.0039 chamfer

Item Code: 4257-3.17

1/4 Inch Diameter Endmill, 1/4 Shank, 5 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0118 chamfer

Item Code: 3098-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 5 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3 Overall Length, 45° Helix Angle, 0.0197 chamfer

Item Code: 3098-12.70

4mm Diameter Endmill, 6mm shank, 4 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, nano-A Coated, HA Shank, 54mm Overal Length, 36/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3804-4.00

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.016 chamfer

Item Code: 3080-12.70

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA Shank, 4 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3182-19.050