0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC87885

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC87975

0.3125 in. (5/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88083

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88101

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88191

0.3125 in. (5/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88029

0.3125 in. (5/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88119

0.3125 in. (5/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88047

0.3125 in. (5/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88137

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88065

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88155

0.3125 in. (5/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

Item Code: TC88173

0.0625 in. (1/16) Cutter Diameter x 0.1875 in. (3/16) Length of Cut x 60 Deg. Included 2 Flute Carbide Drill / Endmill

Item Code: TC31604

0.0625 in. (1/16) Cutter Diameter x 0.1875 in. (3/16) Length of Cut x 60 Deg. Included 2 Flute AlTiN Coated Carbide Drill / Endmill

Item Code: TC31804

0.0625 in. (1/16) Cutter Diameter x 0.1875 in. (3/16) Length of Cut x 90 Deg. Included 2 Flute Carbide Drill / Endmill

Item Code: TC32004