0.6250 in. (5/8) Cutter Diameter x 2.2500 in. (2-1/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Square Endmill

Item Code: TC23216

0.6250 in. (5/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74446

0.6250 in. (5/8) Cutter Diameter x 0.0200 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74447

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74448

0.6250 in. (5/8) Cutter Diameter x 0.0450 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74449

0.6250 in. (5/8) Cutter Diameter x 0.0600 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74450

0.6250 in. (5/8) Cutter Diameter x 0.0900 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74451

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC23850

0.6250 in. (5/8) Cutter Diameter x 0.0600 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC23853

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC23917

0.6250 in. (5/8) Cutter Diameter x 0.0600 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC23920

0.6250 in. (5/8) Cutter Diameter x 2.2500 in. (2-1/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Square Endmill

Item Code: TC23337

0.6250 in. (5/8) Cutter Diameter x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC15640

0.6250 in. (5/8) Cutter Diameter x 2.2500 in. (2-1/4) Length of Cut 4 Flute TiCN Coated Carbide Square Endmill

Item Code: TC95540

0.6250 in. (5/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.2500 in. (1-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74160