6mm Diameter Endmill, 6mm shank, 4 flutes, 30mm Length of Cut, Carbide, HA Shank, 75mm Overal Length, 30° Helix Angle

Item Code: 3015-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 40mm Length of Cut, Carbide, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3015-8.000

10mm Diameter Endmill, 10mm shank, 6 flutes, 22mm Length of Cut, Carbide, HB Shank, 72mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3019-10.000

12mm Diameter Endmill, 12mm shank, 6 flutes, 26mm Length of Cut, Carbide, HB Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3019-12.000

14mm Diameter Endmill, 14mm shank, 6 flutes, 26mm Length of Cut, Carbide, HB Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3019-14.000

16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, HB Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3019-16.000

18mm Diameter Endmill, 18mm shank, 8 flutes, 32mm Length of Cut, Carbide, HB Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3019-18.000

25mm Diameter Endmill, 25mm shank, 10 flutes, 45mm Length of Cut, Carbide, HB Shank, 121mm Overal Length, 45° Helix Angle, 0.2 chamfer (mm)

Item Code: 3019-25.000

6mm Diameter Endmill, 6mm shank, 6 flutes, 13mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3019-6.000

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, Carbide, HB Shank, 63mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3019-8.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 40mm Length of Cut, Carbide, FIREX Coated, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3021-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-12.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-14.000

14mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-14.001

16mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-16.000