9/16 Inch Diameter Endmill, 9/16 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-14.290

5/8 Inch Diameter Endmill, 5/8 Shank, 2 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle

Item Code: 3159-19.050

3/32 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-2.380

7/64 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-2.778

1 Inch Diameter Endmill, 1 Shank, 2 flutes, 2-5/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle

Item Code: 3159-25.400

9/64 Inch Diameter Endmill, 3/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-3.572

5/32 Inch Diameter Endmill, 3/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-3.969

11/64 Inch Diameter Endmill, 3/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-4.366

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle

Item Code: 3159-4.760

13/64 Inch Diameter Endmill, 1/4 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-5.159

7/32 Inch Diameter Endmill, 1/4 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-5.556

15/64 Inch Diameter Endmill, 1/4 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-5.953

17/64 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 1-1/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-6.747

9/32 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 1-1/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-7.144