3.5mm Diameter Endmill, 3.5mm shank, 2 flutes, 7mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-3.500

4mm Diameter Endmill, 4mm shank, 2 flutes, 8mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-4.000

4.5mm Diameter Endmill, 4.5mm shank, 2 flutes, 8mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-4.500

5mm Diameter Endmill, 5mm shank, 2 flutes, 10mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-5.000

5.5mm Diameter Endmill, 5.5mm shank, 2 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-5.500

6mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-6.000

6.5mm Diameter Endmill, 6.5mm shank, 2 flutes, 13mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-6.500

7mm Diameter Endmill, 7mm shank, 2 flutes, 13mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-7.000

7.5mm Diameter Endmill, 7.5mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-7.500

8mm Diameter Endmill, 8mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-8.000

8.5mm Diameter Endmill, 8.5mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-8.500

9mm Diameter Endmill, 9mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-9.000

9.5mm Diameter Endmill, 9.5mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-9.500

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3304-10.000

11mm Diameter Endmill, 11mm shank, 4 flutes, 26mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-11.000