0.2500 in. (1/4) Shank Diameter x 20 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 47620-C3

0.0800 in. Cutter Diameter x 0.2400 in. Length of Cut x 0.9600 in. Reach 4 Flute Carbide Square End Mill

Item Code: 992580

0.2500 in. (1/4) Shank Diameter x 20 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18520-C3

0.0469 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 54647-HARVEY

0.1050 in. Cutter Diameter x 0.1580 in. Length of Cut 2 Flute Carbide Square End Mill

Item Code: 50200-HARVEY

0.5000 in. (1/2) Cutter Diameter x 1.0000 in. (1) Length of Cut x 120 Deg. Included Mill Style 4 Flute AlTiN Coated Carbide Drill/End Mill

Item Code: 988132-C3

0.1000 in. Cutter Diameter x 0.3000 in. Length of Cut 2 Flute Carbide Square End Mill

Item Code: 72100

0.1250 in. (1/8) Cutter Diameter x 0.0400 in. Radius x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 930208-C3

0.3750 in. (3/8) Shank Diameter x 50 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18450-C3

0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Composite Cutting Square End Mill

Item Code: 14624-C4

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Doubled-Ended Chamfer Cutter

Item Code: 902345-C3

3.000 mm Cutter Diameter x 15.000 mm Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 974557-C6

0.0850 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1000 in. Length Of Cut 3 Flute Carbide Corner Radius O-Ring Slotting End Mill

Item Code: 56520

0.0930 in. (3/32) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 923093

0.1090 in. (7/64) Cutter Diameter x 0.0050 in. Radius x 0.3270 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 72902-C3