7/16 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

Item Code: GM716RS4015

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 44302-HELICAL

0.1875 in. (3/16) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Ball Endmill

Item Code: TC11612

0.4375 in. (7/16) Cutter Diameter x 0.4375 in. (7/16) Shank Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.7500 in. (2-3/4) Overall Length 5 Flute APlus Coated Carbide Corner Radius Endmill

Item Code: 88281

0.1406 in. (9/64) Cutter Diameter x 0.0050 in. Radius x 0.4250 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 966705-C3

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 48366-HELICAL

1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill

Item Code: GMHT12RS7030

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 6 Flute Tplus Coated Carbide Square Endmill

Item Code: 83308

1/8 (.1250) Dura-Carb Series 3215 2-Flute GP SE End Mill- Square/Extra-Long

Item Code: 30233-FULLERTON

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 82983-HELICAL

5/32 Inch Diameter Endmill, 3/16 Shank, 4 flutes, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-3.97

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 0.5000 in. (1/2) Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 76478-C3

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

Item Code: 3053-6.35

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 5 Flutes Square GMX-35 Coated Endmill

Item Code: GM14F5

3/4 in. x 3/4 in. x 1-1/2 in. x 4 in. Solid Carbide TiALN 4 Flute Cylindrical Shank .060 Corner Radius General Purpose End Mill

Item Code: I4R0750T150R060 TIALN