0.1875 in. (3/16) Shank Diameter x 20 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 72420-HARVEY

0.2500 in. (1/4) Shank Diameter x 20 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 48520-HARVEY

0.1875 in. (3/16) Shank Diameter x 30 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 72430

0.2500 in. (1/4) Shank Diameter x 30 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 48530-HARVEY

0.1000 in. Cutter Diameter x 0.1500 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 14099-C3

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Length of Cut 3 Flute Carbide Square Upcut End Mill Slow Finisher

Item Code: 992408

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 13962-C3

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 3 Flute Carbide Square Upcut End Mill Slow Finisher

Item Code: 986512

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 3 Flute Carbide Square Upcut End Mill High Finisher

Item Code: 941312

0.2500 in. (1/4) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 3 Flute Carbide Square Upcut End Mill Slow Finisher

Item Code: 986516

1.000 mm Cutter Diameter x 0.100 mm Radius x 3.000 mm Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 976822-C3

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 20660-HARVEY

0.2190 in. Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 68219

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16050-C3

0.0390 in. (1 mm) Cutter Diameter x 0.0050 in. Radius x 0.0310 in. (1/32) Length of Cut x 0.0620 in. (1/16) Reach 2 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 40239-C6