0.0620 in. (1/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 912062-C6

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 984010-C3

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 7 Flute Tplus Coated Carbide Square Endmill

Item Code: 59946-HELICAL

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 43227

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.2340 in. (15/64) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 50078-HARVEY

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.1180 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 993878

5/64 (.0781) Dura-Carb Series 3215 2-Flute GP SE End Mill- Square

Item Code: 32062

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 2 Flutes Endmill

Item Code: CEM14R2015

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 982131-C3

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 20° Helix Angle, 0.0197 chamfer

Item Code: 3189-12.70

1/8 in. x 1/2 in. x 1-1/2 in. 3-Flute Square End ZRN Coated Solid Carbide HellStorm Endmill

Item Code: 373S-125150/ZRN

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.2500 in. (1/4) Length of Cut x 1.5000 in. (1-1/2) Overall Length Carbide 3 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 23011

1/4 (.2500) 3-Flutes, High Helix Solid Dura-Carb Series 3833 AlumaMill G3 End Mill- Square

Item Code: 27002-FUL

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 2.5000 in. (2-1/2) Length of Cut x 5.0000 in. (5) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 86069

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

Item Code: 59950