0.0470 in. (3/64) Cutter Diameter x 0.0050 in. Radius x 0.1410 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 26347-C3

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 81850-HELICAL

1/2 in. x 1-3/8 in. x 3 in. 3-Flute Square End ZRN Coated Solid Carbide HellStorm Endmill

Item Code: 373S-500300XL/ZRN

0.0350 in. (.9 mm) Cutter Diameter x 0.0520 in. Length of Cut x 0.1870 in. (3/16) Reach 3 Flute Carbide Ball End Mill

Item Code: 33435

0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 51004-C3

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut x 0.2500 in. (1/4) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 54831-C6

1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .030CR

Item Code: 37643

0.0390 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 46039-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 63662-C6

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHT38RH5060

1/8 (.1250) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub

Item Code: 32870

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 1.0000 in. (1) Length of Cut x 2.5000 in. (2-1/2) Overall Length 7 Flute Tplus Coated Carbide Square Endmill

Item Code: 59944

1/4 in. x 7/8 in. x 2-1/2 in. 3-Flute Square End ZRN Coated Solid Carbide HellStorm Endmill

Item Code: 373S-250250L/ZRN

1/2 in. Diameter x 1-1/2 in. Length of Cut x 4 in. Overall Length Carbide 4 Flutes Ball Nose TiAlN Coated Endmill

Item Code: CEM12BL4TIALN

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 7 Flutes WTF Coated Endmill

Item Code: GMHT38RH7015WTF