0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut x 1.4200 in. Reach 3 Flutes AlTiN Coated Carbide Ball Endmill

Item Code: 35605-C3

0.1406 in. (9/64) Cutter Diameter x 0.0300 in. Radius x 0.2200 in. Length of Cut x 0.7500 in. (3/4) Reach 3 Flutes Carbide Corner Radius Endmill

Item Code: 42209-HARVEY

0.1406 in. (9/64) Cutter Diameter x 0.0300 in. Radius x 0.2200 in. Length of Cut x 0.7500 in. (3/4) Reach 3 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 42209-C3

0.1180 in. (3 mm) Cutter Diameter x 0.0300 in. Radius x 0.1770 in. Length of Cut x 0.9500 in. Reach 3 Flutes Carbide Corner Radius Endmill

Item Code: 42405

0.1180 in. (3 mm) Cutter Diameter x 0.0300 in. Radius x 0.1770 in. Length of Cut x 0.9500 in. Reach 3 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 42405-C3

0.1406 in. (9/64) Cutter Diameter x 0.0300 in. Radius x 0.2200 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flutes Carbide Corner Radius Endmill

Item Code: 42409-HARVEY

0.1406 in. (9/64) Cutter Diameter x 0.0300 in. Radius x 0.2200 in. Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flutes AlTiN Coated Carbide Corner Radius Endmill

Item Code: 42409-C3

0.2500 in. (1/4) Cutter Diameter x 0.0500 in. Radius x 0.7500 in. (3/4) Length of Cut 2 Flutes Carbide Corner Radius Endmill

Item Code: 47450-HARVEY

0.1090 in. (7/64) Cutter Diameter x 0.0050 in. Radius x 0.3270 in. Length of Cut 3 Flutes Carbide Corner Radius Endmill

Item Code: 50107-HARVEY

0.1090 in. (7/64) Cutter Diameter x 0.0050 in. Radius x 0.3270 in. Length of Cut 3 Flutes TiB2 Coated Carbide Corner Radius Endmill

Item Code: 50107-C8

0.1718 in. Cutter Diameter x 0.3120 in. (5/16) Length of Cut 2 Flutes Carbide Square Endmill

Item Code: 50211-HARVEY

0.1718 in. Cutter Diameter x 0.3120 in. (5/16) Length of Cut 2 Flutes AlTiN Coated Carbide Square Endmill

Item Code: 50211-C3

0.1180 in. (3 mm) Cutter Diameter x 0.1770 in. Length of Cut 4 Flutes Amorphous Diamond Coated Carbide Square Endmill

Item Code: 50304-C4

0.1406 in. (9/64) Cutter Diameter x 0.2200 in. Length of Cut 2 Flutes AlTiN Coated Carbide Ball Endmill

Item Code: 50909-C3

0.0400 in. Cutter Diameter x 0.1200 in. Length of Cut 1 Flute Carbide Square Upcut Endmill

Item Code: 51440-HARVEY