0.2500 in. (1/4) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 4 Flute TiCN Coated Carbide Ball Endmill

Item Code: TC96516

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Ball Endmill

Item Code: TC25550

0.2500 in. (1/4) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 4 Flute Carbide Ball Endmill

Item Code: TC10716

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Ball Endmill

Item Code: TC25502

0.2500 in. (1/4) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Cobalt Fine Pitch Rougher Endmill

Item Code: TE66204

0.2500 in. (1/4) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Cobalt Course Pitch Rougher Endmill

Item Code: TE63504

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute TiCN Coated Carbide Square Endmill

Item Code: TC97516

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Square Endmill

Item Code: TC24408

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC25217

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC25220

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74607

0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74608

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74609

0.2500 in. (1/4) Cutter Diameter x 0.0450 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74610

0.2500 in. (1/4) Cutter Diameter x 0.0600 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74611