0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 0.1870 in. (3/16) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37908-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0300 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52620-C3

0.5000 in. (1/2) Shank Diameter x 50 Deg. Per Side 4 Flute Carbide Flat Chamfer Cutter

Item Code: 18350-HARVEY

0.4375 in. (7/16) Cutter Diameter x 0.0300 in. Radius x 0.6560 in. (21/32) Length of Cut 4 Flute Carbide Reduce Shank Corner Radius End Mill

Item Code: 17628-HARVEY

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 74031-HARVEY

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 2 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 74020-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0300 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52220-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.0040 in. Radius x 0.0600 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 46820-C6

0.0390 in. Radius x 0.0200 in. (.5 mm) Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 67839-C3

0.0580 in. Cutter Diameter x 0.1740 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73058-C3

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut 2 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 24531-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.1000 in. Length of Cut x 0.2000 in. Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 13620-C3

0.1000 in. Cutter Diameter x 0.3000 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 73100-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 220 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 22808-HARVEY

0.0150 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73015-C3