0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0100 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Endmill

Item Code: 90018-HELICAL

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 2.0000 in. (2) Length of Cut x 4.0000 in. (4) Overall Length 6 Flutes APLUS Coated Carbide Ball Endmill

Item Code: 90019-HELICAL

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 1.2500 in. (1-1/4) Length of Cut x 4.0000 in. (4) Overall Length 6 Flutes APLUS Coated Carbide Ball Endmill

Item Code: 90020-HELICAL

0.3750" (3/8) Cutter DIA x 0.1250" (1/8) Radius x 1.0000" (1) Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated

Item Code: 72908-C3

0.5000" (1/2) Cutter DIA x 0.1250" (1/8) Radius x 1.0000" (1) Length of Cut Carbide Corner Radius End Mill, 4 Flutes, AlTiN Coated

Item Code: 74608-C3

0.0156 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cut 2 Flute Uncoated Carbide Square Endmill

Item Code: TC10033

0.0313 in. Cutter Diameter x 0.1875 in. (3/16) Length of Cut 2 Flute Uncoated Carbide Square Endmill

Item Code: TC10034

0.0938 in. Cutter Diameter x 0.5625 in. (9/16) Length of Cut 2 Flute Uncoated Carbide Square Endmill

Item Code: TC10035

0.0938 in. Cutter Diameter x 0.7500 in. (3/4) Length of Cut 2 Flute Uncoated Carbide Square Endmill

Item Code: TC10037

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 2 Flute Uncoated Carbide Square Endmill

Item Code: TC10038

0.1250 in. (1/8) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 2 Flute Uncoated Carbide Square Endmill

Item Code: TC10039

0.0156 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cutt 2 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC10133

0.0313 in. Cutter Diameter x 0.1875 in. (3/16) Length of Cutt 2 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC10134

0.0938 in. Cutter Diameter x 0.5625 in. (9/16) Length of Cutt 2 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC10135

0.0938 in. Cutter Diameter x 0.7500 in. (3/4) Length of Cut 2 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC10137