0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89902

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89903

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0200 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89904

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89905

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89906

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89907

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89908

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89909

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89910

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0600 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89911

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0600 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89912

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0600 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89913

0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 0.0600 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89914

0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 0.0600 in. Radius x 2.2500 in. (2-1/4) Length of Cut x 5.0000 in. (5) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89915

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length 5 Flutes TPLUS Coated Carbide Corner Radius Coolant Through Endmill

Item Code: 89916